Lectrix ECity Zip

The Lectric ECity Zip is an electric moped, expected to be launched in 2024 with a price tag of 80000-90000. It shall come with flexible home charging feasibility and offer an adequate riding range. This electric scooter shall take on the likes of the Odysse Trot and Okinawa Dual 100, in terms of utility.

Below is an overview of the anticipated features and specifications of this Lectrix scooter.

Lectrix ECity Zip Powertrains

This vehicle shall be powered by an 800W hub BLDC motor linked with a 2kWh lithium-ion battery pack. The setup is slated to belt out a peak power and torque of 1300W and 10 Nm, respectively.

Lectrix ECity Zip Specifications

The ECity Zip shall be equipped with a telescopic front suspension and coil spring suspension in the rear. The vehicle should ride on a 12-inch front and 10-inch rear wheel, both wearing tubeless tyres of a ‘90/100’ profile. Furthermore, it shall incorporate drum brakes in the front and rear with a combi braking system, for precise stopping power.

Lectrix ECity Zip Performance

This Lextrix electric scooter is expected to achieve a sprint of 0-25 km/h within 5-6 seconds. Its top speed could be 45 km/l and it should deliver a range of 50-75 km, on a single charge. The two-wheeler is also envisaged to climb over 10-12 degree inclines and its load-carrying capacity should be nearly 150 kg.

Lectrix ECity Zip Dimensions

This Lectrix ECity e-scooter shall have a length of 1750mm, a width of 880mm, and a height of 1200mm. it should have a wheelbase of 1300mm and a ground clearance of 165mm, for better ride-ability in different surfaces. Further, its seat should positioned at a height of 750-760mm from the ground.

Lectrix ECity Zip Charging

This moped is foreseen to come with fast charging features that would make it charge fully in nearly 3-4 hours. The manufacturer shall provide a 48V, 15A/7.5A charger to offer the feasibility of charging the vehicle easily at home.

Lectrix ECity Zip Exterior Design and Elements

The exterior design of the Lectrix ECity Zip looks sturdy and ergonomic, after looking at the available pictures. It features a round bulb headlamp in the front flanked by sleek LED turn indicators. The seat is split and the pillion seat is extractable to make it a loading carrier for the goods. It also has a sturdy pillion grab bar that would work well for pillion riders as well as loaded goods. The front panel and fender are minimalist while the side panel also looks simplistic. The floorboard has enough space to accommodate goods and offers better leg space to the rider. Moreover, the rear wheel is covered with a black fender and the main stand looks strong.

Lectrix ECity Zip Features

The ECity Zip shall be provided with a digital speedometer having basic mobile app connectivity features. The tail light and signal lamps should be LED and a registration plate illumination light is also expected. Moreover, we expect a mobile charging port also, that would ensure that mobile phones can be charged on the go.

Lectrix ECity Zip Price

The Lectrix ECity Zip price is slated to be similar to that of the Hero Electric NYX HX, Simple Energy Dot One, and Okinawa Praise. You can scroll up to the price section, to check the latest Lectrix scooter price.

Lectrix ECity Zip Launch Date

The manufacturer is anticipated to launch this two-wheeler in February 2024. We shall update the exact launch date once it is announced by the manufacturer.

While the current information about the scooter is based on informed speculation and publicly accessible sources, it's important to note that the final features may differ upon the official launch. We are closely following the manufacturer's announcements to maintain the accuracy of this page.